Menu
Compatible with a wide range of resins in 3 grades.
Can be used under simple conditions on site.
| Compatible Resins | PP・PE・GPPS・Transparent Material | ABS・AS・HIPS・PA6/66・POM・PBT | PC・PC-AMS・PA6T/9T | |
| Grade | GSS/GWP | GSS/GWP/GWS | GSS/GWS | |
| Application Range | Color Change / Resin Type Change | ◎ |
◎ |
〇 |
| Contaminant Removal | 〇 | ◎ |
◎ |
|
| Seal | × | × | × | |
| Hot Runner | × | × | × |
| Grade | Feature | Raw Material | Temperature Range | Applicable Resin |
| GSS | High-Grade Product Carbide Removal / Color Change / Resin Change Combines superior cleaning power with excellent subsequent replacement ability All-Purpose Grade |
AS＋GW | 200 ～ 330℃ | PC・PC-ABS・PA6T/9T・ABS・AS ・HIPS・PA6/66・POM・PBT・Transparent Material |
| GWS | Focus on Carbide Removal Emphasis on Balance with Wide Range of Applicable Resins and Temperature |
AS＋GW | 200 ～ 320℃ | PC・PC-ABS・PA6T/9T・ABS・AS ・HIPS・PA6/66・POM・PBT |
| GWP | Focus on Glass Discharge Color Change / Resin Change High Cleaning Power with Excellent Subsequent Resin Replacement Ability |
PP＋GW | 180 ～ 280℃ | ABS・AS・HIPS・PA6/66・POM ・PBT・PP・PE・GPPS・Transparent Material |
GWP…Prioritizes glass discharge, ideal for color change/resin change. Highly effective cleaning with excellent subsequent resin replacement (Material: PP+GW)
GWS…Prioritizes carbide removal. Balanced performance with a wide range of applicable resins and temperature ranges (Material: AS+GW)
GWS…Prioritizes carbide removal. Balanced performance with a wide range of applicable resins and temperature ranges (Material: AS+GW)
Main Components:
GWS: AS (approximately 40%), Glass Fiber (approximately 60%)
GWP: PP (approximately 40%), Glass Fiber (approximately 60%)
GWP: PP (approximately 40%), Glass Fiber (approximately 60%)
Grade Selection Guidelines
The selected grade may vary depending on the molding temperature range. Please inquire for further details.
Measures against foreign matter and black dot defects with purging compounds.
Recommended Purging Method
| Grade | Recommended | Highly Effective | Usable |
|---|---|---|---|
| GSS | Automatic Purge | Rotational Purge | Short Purge |
| GWS | Short Purge | Automatic Purge | Rotational Purge |
| GWP | Short Purge | Automatic Purge | Rotational Purge |
- For example, with our 80-ton molding machine, set the dosing to 15mm and increase the speed from the usual 100mm/sec to 120-150mm/sec for cleaning.
- The rotation speed and temperature remain the same as the molding conditions of the previous material.
- This method is also effective for discharging ecomaru with subsequent materials.
| Molding Machine Capacity (Clamping Force) | Usage Guidelines (kg) |
|---|---|
| 80 tons | 0.2～0.4 |
| 125 tons | 0.4～0.6 |
| 550 tons | 1.5～2.5 |
| 800 tons | 4.0～6.0 |
| 1250 tons | 6.0～8.0 |
| 3000 tons | 15～20 |
Menu